HomeProductsAvionics equipment
Avionics equipment
Product
51# connector Box
Parameters
Flight control and navigation computer connector box, converting the J30 connector into a common Dupont port, MOLEX socket, etc., avoiding custom cables, suitable for the A5 and A7 and A8 series flight control and navigation computers.
Power supply module
(built-in voltage and current sensor)
Provides power input to the aircraft, including the flight control and navigation computer, motor ESC and built-in voltage and current sensors to monitor the power supply and power consumption of the aircraft.
External magnetic compass
Separate external magnetic compass, can be used with all series of OBSIDIAN FCC, interface is TTL serial.
Network RTK
UM982 differential unit carrier end+network base station integrated, mentioned to be more compact, can achieve centimeter level positioning, communication interface is TTL serial port.
External integrated
GNSS + magnetic compass
Integrated magnetic compass, GNSS receiver and GNSS antenna in one equipment, reducing cable complexity, communication interface CAN/TTL, using CAN bus to communicate with the flight control computer, reducing serial port occupation.
UM982 differential GNSS on-board terminal
UM982 differential on-board terminal, communication interface TTL serial.
Airspeed meter
Provides vital atmospheric data for aircraft flight.
LED status light
Flight control and navigation computer operating status indication.
T900
The product supports point-to-point, point to multipoint, and centered Mesh communication modes, with a working frequency of 902~928MHz. Under good environmental conditions, the maximum transmission distance can reach 60KM. The external interface supports TTL and 232.
Product performance:
81.5 x 47.5 x 18mm
167g
-40℃~70℃
902~928MHz
1W(30dBm)
60Km(Air to ground visibility)
Up to 276.4kbps
Supports up to 921.6kbps
7V~37V
<7w